Mining complexes

Mining of hard coal deposited in low, medium and thick seams.

Mining complexex

Mechanized complexes for mining in low layers

The mechanized complex is intended for mining coal in low seams with a thickness of 0.7 – 1.6 m.

Seam parameters:

  • Seam thickness: 0,7 – 1,6 m
  • Mineral rigidity: up to 60 MPa
  • Stope incline: ±25°
  • Incline in direction of stope: -25°/+5°
  • Max. length of stope: 300 m

Pro vybavení porubu je možno použít následující zařízení. Naši specialisté jsou připraveni zpracovat a dodat další mechanizované komplexy odpovídající konkrétním geologickým podmínkám sloje.

Mining complexex

Mechanized complexes with overburden discharge

The mechanized complex is intended for coal mining with overburden discharge in thick seams through the enclosing reinforcement.

Seam parameters:

  • Seam thickness: 2,5 – 20 m
  • Mineral rigidity: up to 60 MPa
  • Stope incline: ±25°
  • Incline in direction of stope: -25°/+5°
  • Max. length of stope: 80 – 250 m

The following equipment can be used to equip the flange. Our specialists are ready to process and supply other mechanized complexes corresponding to the specific geological conditions of the seam.

Mining complexex

Mechanized complexes for mining in medium-thick seams

The mechanized complex is intended for mining coal in medium-thick seams with a thickness of 1.6 – 3.5 m.

Seam parameters:

  • Seam thickness: 1,6 – 3,5 m
  • Mineral rigidity: up to 60 MPa
  • Stope incline: ±25°
  • Incline in direction of stope: -25°/+5°
  • Max. length of stope: 300 m

The following equipment can be used to equip the stope. Our specialists are ready to process and supply other mechanized complexes corresponding to the specific geological conditions of the seam.

LOGO-panel3-ALTA
LOGO-panel3-SEMI
LOGO-panel3-DMS